Cart Contents
Categories
- Specials (9)
- Featured (25)
- CLEARANCE COMBOS (5)
- KURYAKYN HAYABUSA PARTS (10)
- AUDIO SPEAKER SYSTEM FOR SUZUKI CAN-AM KAWASAKI (2)
- LIMITED EDITION CAN-AM SPYDER PARTS (4)
- CAN AM SPYDER BILLET AND PERFORMANCE PARTS (31)
- RED LINE 3D LOGO ITEMS 99 TO 2010 HAYABUSA (8)
- LIMITED EDITION HAYABUSA LOGO ITEMS (72)
- CHAINS AND SPROCKETS SWING ARM EXTENTIONS AND PLUGS (20)
- 2008 2009 2010 HAYABUSA CHROME AND BLACK PARTS (212)
- HAYABUSA PACKAGE KITS (28)
- BUSA 1999 TO 2007 CHROME AND BLACK CUSTOM PARTS (175)
- POWER COMMANDERS / K&N FILTERS JUICE BOX’S (10)
- BROCKS AND TWO BROTHERS EXHAUST SYSTEMS (21)
- BUSA AND GSXR 1000 BRAKE PARTS (36)
- BOMB AND FREAK SPIKES GSXR & BUSA (79)
- SUZUKI GSXR CHROME BILLET PARTS (55)
- KAWASAKI ZX 14 PARTS (16)
Manufacturers
Bestsellers
KURYAKYN ROARING TOYZ Trident MIRROR KIT 99 TO 201...
NEW STYLE 99 TO 2010 HAYABUSA CHROME ROARING TOYZ...
SCYTHE II KURYAKYN ROARING TOYZ MIRROR KIT 99 TO 2...
KAWASAKI ZX14 CHROME ROARING TOYZ CONVEX MIRROR KI...
NEW STYLE 99 TO 2010 HAYABUSA black anodized ROARI...
KAWASAKI ZX14 BLACK ANODIZED ROARING TOYZ LOWERIN...
99 TO 2010 HAYABUSA CHROME brake and clutch lever...
KAWASAKI ZX14 BLACK ANODIZED ROARING TOYZ SWING AR...
KAWASAKI ZX14 BLACK ANODIZED ROARING TOYZ CONVEX M...
1999 TO 2010 HAYABUSA CHROME FREAK SPIKE HANDL...
Sale Item
Currency
Product Details
| View Larger Image |
2008 2009 2010 Black Widow 3D Web Can Am Spyder REAR LICENSE PLATE LIGHT High Impact High Quality
SKU: blk light
|
Overview
Black widow 3D web contrast cut Can Am Spyder Rear license plate light This covers will make a high impact when looking at your spyder and quality at a very reasonable price. The silver and black plate light has a raised 3D black web design wil attract the eye. includes a hidden 3led light bar hidden inside
Fits:2008 and Newer Can Am Spyder sm5 se5
product info: this part is made of t6 billet aluminum made from manufacture specs it is BLACK ANODIZED NOT POWDER COATED we check all parts for any damage this way we make sure you get high quality no defects or any thing. all parts are original design none have been copied or knocked off they are all original rmw custom parts.
install: After installing a dozen of them now from limited edition spyders 600 and all the way up to the 09 non numbered there is no reason to take off then rear fender light can be installed by hand faster and easier Takes 30min to install all you need are crimping pliers and a 10mm wrench Simply take off the 2 nuts on the back side of the fender that holds the oem light on . then pull the light away from the fender as far as you can then cut the oem wires off as close the back of the old light as you can get . then strip the factory wires and crimp them in to one end of each of the 2 connectors included . then cut off any excess wire on the back of the light you do not need there is a lot of it on our new light . then slide on the shrink tubing also included with light on to the wires then crimp the wires in to the connectors black to black orange to white . the connectors are also heat shrink so take a lighter and heat them up they will shrink down creating a water proof seal then slide the shrink tubing over the connectors and wires heat it and it will shrink this makes double water proof connection . then in stall the 2 screw post in to the back of the new light included with it using blue loc tite I suggest put the light back on the fender stuffing extra wire behind light and in fender put the 2 nuts back on the back washers also if yours had them on it . and you are done
warranty 6 MONTH . unless it is cause by install . or road damage of any kind
Fits:2008 and Newer Can Am Spyder sm5 se5
product info: this part is made of t6 billet aluminum made from manufacture specs it is BLACK ANODIZED NOT POWDER COATED we check all parts for any damage this way we make sure you get high quality no defects or any thing. all parts are original design none have been copied or knocked off they are all original rmw custom parts.
install: After installing a dozen of them now from limited edition spyders 600 and all the way up to the 09 non numbered there is no reason to take off then rear fender light can be installed by hand faster and easier Takes 30min to install all you need are crimping pliers and a 10mm wrench Simply take off the 2 nuts on the back side of the fender that holds the oem light on . then pull the light away from the fender as far as you can then cut the oem wires off as close the back of the old light as you can get . then strip the factory wires and crimp them in to one end of each of the 2 connectors included . then cut off any excess wire on the back of the light you do not need there is a lot of it on our new light . then slide on the shrink tubing also included with light on to the wires then crimp the wires in to the connectors black to black orange to white . the connectors are also heat shrink so take a lighter and heat them up they will shrink down creating a water proof seal then slide the shrink tubing over the connectors and wires heat it and it will shrink this makes double water proof connection . then in stall the 2 screw post in to the back of the new light included with it using blue loc tite I suggest put the light back on the fender stuffing extra wire behind light and in fender put the 2 nuts back on the back washers also if yours had them on it . and you are done
warranty 6 MONTH . unless it is cause by install . or road damage of any kind
Photos
|
|
Reviews
Add Your ReviewCurrently there are no reviews for this product. Share your opinion with others, be the first to write a review.





